Rusty's not very quiet cuda progress

[mr340]

Beeper is fascinated by shiny things...
Looking good Rich. [smilie=e:

 

[viking]

Nice!!!! [smilie=e:

 

[RUSTY Cuda]

Shot some more chit, not even gonna get into the good & the bad, but a gallon of pure gold is shot & not much can be called complete!

 

[RUSTY Cuda]

header has 2 tiny flaws, gonna try & clear it anyway, might ??????? hide em, I have to sand it anyway so I might as well see what magic the clear can work!

 

[RUSTY Cuda]

K frame of coarse, which will be 99% hidden came out nice, she does show the neglect it's been through but the paint came nice!
if time allows I will clear the good ones sunday, then it's back to the 74 a while, got the power steering hoses, rad hoses , heater hoses & the belts I got last week to put in, let my fingerprints grow back awhile!

 

[68R/T]

Not to rain on your parade, but, shouldn't the K-frame be low-gloss black? [smilie=e:

 

[mr340]

Not to rain on your parade, but, shouldn't the K-frame be low-gloss black? [smilie=e:[/quote]
[smilie=e: ...Yep... [smilie=e:

 

[divingtigger]

Looking real good Rich. Just trying to arrange pick up of my 74 then I can start from the begining and use these pages as a guide [smilie=b:

 

[RUSTY Cuda]

Not in MY car! don't give a hoot about correct, just want it perty! [smilie=e: Rich.

 

[mr340]

don't give a hoot about correct, just want it perty! [smilie=e: Rich.[/quote]
I like the way you tink!!!! [smilie=e: [smilie=e:

 

[RUSTY Cuda]

[smilie=e: Hey 68, what motor should be in the wagoon! [smilie=e: [smilie=c: thanks for lettin me know, if I screw up on the 74 I need to know, that I will try for as correct as possible(without going [smilie=E: ) Rich.

 

[RUSTY Cuda]

Ok folks, now I still got a lot of work to do on most of these parts, was a beautiful CALM morning, the hole time I was preppin for the clear coat, was just gettin started with the clear coat & the friggen wind came up, so as good as it looks in the pics, I got more dirt & bugs than usual, the clear does hide some chit, but also showed a wave I missed in the quarter & my droopin body line, both near each other on the driver quarted(droop over wheel well & waves just above the line foward of the wheel well), the rest I think I can live with!

 

[RUSTY Cuda]

Pass side not bad, one spot I messed up myself ! [smilie=e:

 

[RUSTY Cuda]

Shot one fender & all those little pieces, the other fender needs a bit more work!
Put a little sun on this baby & the color looks soooooo different!

 

[viking]

Got some nice weather too! [smilie=e:

 

[RUSTY Cuda]

Vik, hope you used it to burn up some gas, tooling around & smokin the tires!
Thought I was gonna be inside sandin out the bad parts(AGAIN) but it was so nice this am I decided to play outside with the clear(Nasty stuff to spray indoors!) I'll have too much a that in the next few months! Rich.

 

[68R/T]

[smilie=e: Hey 68, what motor should be in the wagoon! [smilie=e: [smilie=c: [/quote]

But it's painted the right color.

 

[RUSTY Cuda]

still sanding away , doing & redoin parts, touch ups on the shell look ok, will know for sure after next coat a clear, dents in the fender "incident" done gettin ready for a repaint & cleaned up the other fender so I can shoot both at once, got the tranny mount done when shootin the touch ups, gotta dig out more parts to get ready for paint!
Nice little suprise in the backround, I got the plates for the 74 in! [smilie=e:

 

[OrphanedV8s]

Cool Rusty!

Dave!

 

[OrphanedV8s]

Cool Rusty!

Dave!