Search results

Crap I was going to lay a ruler across & I forgot! I do have the clamp with the hole & another with a flat base, that clamp will triple the shipping! The only ones that fit are the chrome lookin ones & they don't go in from the other side, the smallest one is beat up enough not to slide in either?

Jass, 4 parts tagged for you, I will check the A/C compressor to see how it turns, when I got the car the wire to it was gone, so it was never even tried? Jack stands will stay. No rush on the bezel, I won't buy till I hear from you! I'll lay out those tools next time out. Bob, I do have a...

Pick up's in for service, when it comes back I'm gonna finally do a junk run & get rid of all the metal scrap, tired of looking at the mess. Rack & all is gonna be outta here!

Not much of a difference yet, but I can see a little more of the bench!

OK, dum dum asks what are these, if anyone can use em free, but it's heavy & I would ask you cover the shipping.

OK now something I need, right hand dash bezel between the column & the radio. Saw a set on ebay for 100, so Is 50 a fair offer for the one, if anybody has one, 50? + shipping sound good?

Holy crap, the sender is here already, they shipped it overnight from spectrum, I did not ask for that & don't think I paid for it? But I'm also pissed, it said if you don't change the gasket & lock ring warrantee is void, NO WHERE in the add or order did they say it came with it, so I have...

Since I will be waiting on the parts for the gas tank there's not much I can do on the car so after a quick look around at the nasty looking work benches I decided to start the cleanup process. I have a lot of stuff I won't use, will offer it up to you guys, all parts are free but on a few I...

Yep, had it capped, but would be nice not there at all!

Yep just switched the order to the "B" unit for 3/8ths But it won't be here for a week, special order direct from spectrum!

Not fixing this thing, no sign of it ever being soldered, looks like just pressed on, what gets me is the strip it's pressed into is bare metal where it hits the retainer ring, wouldn't that just be a dead short? Anyway I tried to bench test the ohms & got the same reading where ever I put the...

Guess I'll pull it & see if I can rube it & it works before I hit autozone!

K auto zone has 3 2 spectrum B has that extra return I don't need & A does not # on A is FG67A $91.49 1 year warrantee autotecnica #DG0514061 1 line $49.99 I month warrantee. that's a new one on me! car parts .com Liland 1 line $84.00 parts geek TRQ #16640-02853149 5/16 1 line...

Well, I may have stumbled onto another problem, I was testing the sensor put 2 jumpers to it, one at the ground strap & one on the smaller line (wouldn't clip the fatter one) but goes to the same base? No workie, went under to remove the jumpers & the feed wire was just hanging, I thought it...

Well I thought I was buying good stuff, I think it all & the gas tank came from the same place, where it's made??? probably china!

Did you try grounding the sender's fuel output line (the feed pipe to the pump) directly to the battery (-) post and re-test like I suggested? That would definitely tell us if the sender's defective. Pretty sure I did all 3 points, the line, the ground strap & the base of the sender. but what...

Hooked up the gauges again, still in a nice deep vac, ran the pump for another hour or so & then put a holding charge in, standing pressure about 50 lbs, Will let that sit till I get up the courage to actually try & turn it on. Have no idea if any of it (well the inside stuff) will work. Read...

Ordered the wiper blades so I can get those on.

K, had trouble getting a good reading between the fuel line & the ground strap, I had clear coated the lines, so I scratched it around to peel the paint & took it off & squeezed it tighter. Moved the side on the tank end around to scratch that into the metal, got the reading now, my ohm meter...

OK, definitely an angle in the dash, looks like there might be just enough straight to mount a straight one all the way left, looks like another hole far left too? Side is all kick panel & would think screws had to go through that to te metal, didn't look for mounting holes. Pesky buzzer...